TS114 is a door bottom intumescent fire and hot smoke seal that is designed to salvage non-compliant fire doors where clearances exceed 10mm under fire doors as per AS/NZS 1905.1.

The simple retrofit design avoids costly door replacement and the need to remove the door during installation.

TS114 is approved for use on leading proprietary fire doors. 

Note: TS114 should just clear the floor during door opening and closing. To avoid the seal fouling on uneven or sloping surfaces, the finned gasket portion should engage an approved Raven threshold plate. This will enhance the other icon sealing functions.

    Location Bottom of Fire and smoke doors.

    Min/Max Gap 14mm to 20mm (without TUR threshold plate). Seal Sizes 820mm,915mm,

   1220mm.Standard Finish Aluminium anodised 15 microns. Satin Clear (Silver) or Bronze finish.

Seal Material Intumescent infill, flexible PVC cover strip (SE) and finned gasket.

Fixing Method Simply cut seal to length. Zinc plated,cross recess S.T. screws of the appropriate size are supplied. Used in Conjunction Approved TUR door frame seals and threshold plates