The versatility of Raven brush strip and ease of installation makes it particularly suitable for sealing difficult applications such as sliding, revolving,pivot, roll-up and panel lift type doors against smoke, odours, draughts, light, dust, insects, bushfire embers and for the retention of air conditioning.Raven nylon brush strip sealing is recognised as solving draught problems where heavy duty use is required in areas such as public transport applications. Tests have proven that minimal wear occurs with prolonged use to either brush or contact surfaces. Dense black nylon bristles are locked into a galvanised steel spine which is then generally fitted into an anodised aluminium holder. The aluminium holder will take all bristle lengths, and the adhesive PVC foam tape is standard on most aluminium holders. Raven brush strips are available without the aluminium holders. Specify for example RP57 (brush only).

A nylon brush strip seal, with an aluminium carrier, that mounts to the inside or outside of a door.

Location Door bottoms, single, double or sliding. Min/Max Gap Up to 13mm (user determined).

Seal Sizes Available in stock lengths.

Standard Finish Aluminium anodised 15 microns. Satin Clear (Silver) or Bronze finish. P.E. Paint (at extra cost, refer page 3).(Silver) or Bronze finish. P.E. Paint (at extra cost, refer page 3)Seal Material Fine, dense, black nylon filaments, UV stabilised. Fixing Method Self adhesive backing. Can screw fix .Note: Contact  surface must be clean, smooth and if painted, well cured. Used in conjunction Raven threshold plates